Surfaces are protected either by wood wax or wood oil. The pores will not be locked. The natural diffusion of the wood remains.

Wax for wood preservation is an old protection technique which is suitable for wooden indoor products. Wax retains its originalness and breathing ability to the wood. Waxed wood has an special, silk-shining appearance. The wax is twice laid on with a cloth in the wood grain direction. After drying the gloss is reached by polishing the horsehead with a fine fleece. The gloss, which could be gone after years can be refurbished without difficulties by polishing it again. Pigmented wax can be used for special colours - > see chapter "Wood treatment and care" in the FAQs.

Wood oil with UV protection are very suitable for outdoor products. An extremely strainable surfaces will be established.Wood oil is laid on with a brush. It penetrates deeply into the pores and lends to the wood a warm clay/tone. We use high-quality TEXTROL wood of the manufacturer OWATROL. TEXTROL is an air-drying nature oil with a very high penetrating ability. The oil  is characterised by transparent micro pigmentation, which protects the wood almost colorless. The original colour of the wood remains. UV protection pigments are transported due to their minimum particle size by penetrating the oil into the wood pores. The pores filled with oil and decreases the receptiveness of the wood for humidity.